Wednesday, April 02, 2008

How to Create a Puff Comforter


How to Sew a Biscuit or Puff Quilt


from wikiHow - The How to Manual That You Can Edit






These quilts are so easy to make in any size. Basically, you make individual stuffed squares from cloth and sew the squares together. These quilts date back to the 19th century and were very popular in the 1970's when people discovered recycling.
You can be very creative with your design. Make all your squares the same, use different pieces of fabric for each square, arrange your squares to a design you create.The squares can be large or small; for your first quilt, start with larger squares; try four inch squares. Each square consists of two square pieces sewn together; the bottom piece is cut 4" square and the top piece is cut one inch larger, 5". This provides room for the stuffing to fit inside.

Steps


  1. Using 4" squares, you will need approximately 115 squares to make a 60 x 84 inch quilt (15 x 21 squares).
  2. Gather around the 5" square or make darts in the middle of two of the sides to fit the 4" square. Place the two squares right side together and baste together at three of the edges (one side is left open to insert the stuffing).
  3. Turn right side out, carefully pulling the corners out. Fill with lightweight polyester filling. You can use old nylons or other stuffing but you will find your quilt very heavy when it is done. If you don't put in a generous amount of stuffing, you will find that you quilt flattens over time. Slip stitch the open end closed. (using a slip stitch makes the stitches invisible).
  4. Distribute the stuffing evenly. For larger squares, it is recommended that you place a stitch in the center; two stitches with embroidery thread arranged in an x is easy and will keep your stuffing from slipping. If you have small squares, you will not need to do this.
  5. When all your squares are finished, you can join them together by: slip stitching them together or use rickrack, braid or ribbon to join.
  6. The quilt should have a backing. Cut your backing from sheet material or satin, place it on top of the right side of the quilt, slip stitch around three of the outer edges, turn inside out so the right side of the quilt is showing and slip stitch the remaining edge. If you wish you can tack one or two x stitches throughout the quilt to hold the back in place.


Tips


  • Do not stuff until you have finished cutting and sewing all the squares. It is easier to store cloth squares than puffy squares.
  • These quilts are lovely but can be tedious as they are repetitive. Don't be in a hurry and be sure to watch TV or listen to the radio while you work or work with a friend and chat as you work.
  • It is optional to place an edging around your quilt; use lace, a ruffle or braiding.


Related wikiHows





Article provided by wikiHow, a collaborative writing project to build the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Sew a Biscuit or Puff Quilt. All content on wikiHow can be shared under a Creative Commons license.

Foundation Piece a Quilt Block - wikiHow

Foundation Piece a Quilt Block - wikiHow
http://www.wikihow.com/Main-Page">%20border="0"%20src="http://www.wikihow.com/skins/WikiHow/wikiHow.gif">http://www.caroldoak.com/free-quilt-patterns.php" rel="nofollow">Source of pattern for the block shown in the article.
  • http://piecebynumber.com/pastbom/archbom.htm" rel="nofollow">More Free Patterns
  • http://www.dmoz.org/Arts/Crafts/Quilting/Paper_Piecing/" rel="nofollow">And MORE...
  • Article provided by wikiHow, a collaborative writing project to build the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How'>http://www.wikihow.com/Foundation-Piece-a-Quilt-Block">How to Foundation Piece a Quilt Block. All content on wikiHow can be shared under a Creative'>http://creativecommons.org/licenses/by-nc-sa/2.5/">Creative Commons license.



    How to Foundation Piece a Quilt Block


    from wikiHow - The How to Manual That You Can Edit

    Many people have done "Quilting"... but are put off by the labor-intensive cutting and fitting process that makes a quilt block. "Paper Piecing" or "Foundation" quilting takes all the hassle out of cutting and sewing your quilt block. You can even use oddly shaped pieces of fabric scraps without extra cutting.
    Here's how those expert quilters sew those acute angles with absolute precision every time. And it's so easy that it's practically "Quilt by number"!

    Steps


    1. Select your pattern and photocopy or print enough of them to make your quilt. You will need one copy per block.
    2. Select your fabrics.
    3. Launder all of your fabrics. Washing them first means that the worst shrinkage, running, fading, etc. takes places before they're stitched.
    4. Iron the fabrics smooth if necessary.
    5. Cut rectangles or squares in sizes which will cover the shapes in your pattern blocks. These can actually be ripped/torn in strips and then cut for speed and ease.
    6. Notice that the pattern pieces are numbered in the order in which you should sew the pieces.
    7. Place the cloth for piece #1 on the BACK side of the paper with the back/wrong side of the cloth towards the paper.
    8. Hold the paper up to a light to verify that the fabric is oriented so that it covers all of the area of piece one with at least a quarter inch of overlap in all directions.
    9. Place the cloth for piece #2 (white) with its right/front side facing the right/front side of piece #1 (red) and its seam edge aligned with the seam line and overlapping by a minimum of a quarter inch.
    10. Pin the two fabrics in place on the paper.
    11. Flip the paper to the front/printed side.
    12. Machine stitch the seam line from the printed side.
    13. Trim the seam allowances to 1/4 inch.
    14. Unpin the fabrics and flip piece #2 over the seam and pin it in place over its alloted area on the block.
    15. Hold up the paper block pattern to the light to check that piece #2 will cover its alloted area.
    16. Place the cloth for piece #3 with its right/front side facing the right/front side of piece #2... and its seam edge aligned with the seam line and overlapping by a minimum of a quarter inch (6 mm).
    17. Pin the two fabrics in place on the paper.
    18. Flip the paper to the front/printed side and use back light to check the placement.
    19. Machine stitch the seam line from the printed side.
    20. Trim the seam allowances to 1/4 inch (6 mm).
    21. Unpin the fabrics and flip piece #3 over the seam and pin it in place over its alloted area on the block.
    22. Repeat the process of placing, pinning, checking then sewing and trimming for each successively numbered piece.
    23. Machine baste around the perimeter of your block when complete.
    24. Trim all edges to a quarter inch (6 mm) seam "allowance".
    25. Tear away the paper "backing".
    26. VoilĂ ! You've got a perfectly sewn quilt block, with perfectly measured "seam allowances" and perfect corners - even in those hard-to-manage acute angles!


    Tips


    • Shorter stitch length makes tearing the paper easier later. 1-1.5 mm works well.
    • Free block patterns can be found in many places on the internet. Just search for "Free Foundation Quilting Blocks". The variety and selection are astounding.
    • You can merely cut the fabric into long strips of sufficient width to cover the pattern pieces of that cover... and sew and cut them "as you go" to conserve cloth.
    • Any shape or size of scrap can be used, so long as it has one straight edge to be sewn. Because of this, you can utilize even the smallest scraps with little waste.


    Warnings


    • Scissors and needles are sharp. Handle with appropriate care.
    • Be sure to line up material in correct direction, lining it up with arrow in pattern (parallel with selvage of material).


    Things You'll Need


    • A Paper pattern (and a lot of copies of it)
    • Fabrics - generally cotton scraps will do for your first attempt
    • Scissors
    • Sewing Machine w/matching thread etc.


    Related wikiHows




    Sources and Citations





    Article provided by wikiHow, a collaborative writing project to build the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Foundation Piece a Quilt Block. All content on wikiHow can be shared under a Creative Commons license.

    Saturday, March 29, 2008